Transparent Audio Level Control for Broadcast, Recording and Live Sound
The patented technologies within the 320D are totally unique. By going beyond conventional design ideas, the 320D provides audio processing with unprecedented sound transparency, yet is exceedingly effective at controlling levels. No other product can match the performance of the 320D. Algorithms like our "DVG", "DRC", and "FDL" have yet to find any rivals.
The 320D's Frequency Discriminate Leveler section, with the Dynamic Verification Gate and the Silence Gate, slowly adjusts the volume level of an audio stream with very complex algorithms that hide its work. It works differently at different frequencies and stops processing when the sound stops then resumes instantly when the sound reappears so there is no distracting increases in program background noise. When you listen, you know the levels are made more even, but you don't perceive the levels are shifting.
The 320D’s Variable Slope Compressor, Dynamic Recovery Computer and Dynamic Verification Gate add adaptable compression to match the texture of changing audio sources. You don't hear pumping or other audio artifacts, just natural sound that is evenly consistent in loudness.
The 320D’s limiter acts on peaks that shoot beyond average program levels so they are easy to handle by any analog or digital recording system.
The 320D can act as two independent mono processors or one linked stereo processor by front panel selection. This is true with both analog and digital I/O.
When the analog input is used, the digital output contains the 320D’s processing. When the digital input is used, the analog output contains the 320D’s processing, properly leveled.
Aphex builds products that last and last without need for repairs or calibration. Some Compellors have literally been in 24 hour use in the same rack for a decade, or longer! When you specify a Compellor, you know it will do its job flawlessly and give you peace of mind.
Applications
- Broadcast pre-processing
- MP3 Encoding and playback
- Recording
- Installed and Mobile sound
- DAW input
- Mastering
- Satellite uplinks
- Background Music
- Ham Radio
- Tape Duplication
- Cable TV
| NOMINAL OPERATING LEVEL: user selectable on back |
+4dBu | -10dBV | |
| ANALOG INPUTS | |||
| Connector | 3 pin XLR Female | ||
| Type | Transformerless servo balanced RFI filtered | ||
| Impedance | 22k ohms balanced, 11k ohms unbalanced | ||
| Operating Level | user selectable +4dBu or -10dBv | ||
| Max input level | +27dBu (ref = +8);  +25dBu (ref = +4) | +10dBV (ref = -10) | |
| CMRR | >90dB at 100Hz  >70dB at 1kHz  >50dB at 20kHz | ||
| DIGITAL INPUTS | |||
| Connector | 3 pin XLR female | ||
| Type | Transformer balanced | ||
| Impedance | 110 ohms | ||
| ANALOG OUTPUTS | |||
| Connector | 3 pin XLR Male | ||
| Type | electronic servo balanced (unbalanced without 6dB loss) | ||
| Impedance | 65 ohms bal or unbal (nominal load 600 ohms or greater) | ||
| Max level out (bal) | +25dBu (ref = +4) | +10.8dBV (ref = -10) | |
| Max level out (unbal) | +20dBu (ref = +4) | +10.8dBV (ref = -10) | |
| DIGITAL OUTS | |||
| Connector | 3 pin XLR Male | ||
| Type | Transformer balanced | ||
| Impedance | 110 ohms | ||
| AUDIO | |||
| Frequency Response | ±1dB 10Hz to 65kHz | ||
| Hum and noise (1k tone at unity gain) | |||
| No gain reduction | -67 dBu (ref = +4) | -86dBV (ref = -10) | |
| 10dB gain reduction | -74 dBu (ref = +4) | -89dBV (ref = -10) | |
| Crosstalk at 20kHz | -65 dBu (ref = +4) | -78dBV (ref = -10) | |
| Dynamic THD | typically .05% for 1kHz at 20dB gain reduction | ||
| Static THD | .025% at maximum output level | ||
| IMD, max output | .13% (ref = +4) | .4% (ref = -10) | |
| SYSTEM FUNCTIONS | |||
| Compression | |||
| Frequency Discriminate Leveling | |||
| Peak Limiter | |||
| Dynamic Verification Gate (DVG) | |||
| Dynamic Recovery Computer (DRC) | |||
| Silence Gate | |||
| Stereo Enhance | |||
| THRESHOLD | |||
| Compressor | 30dB below nominal level | ||
| Leveler | 30dB below nominal level | ||
| Limiter | 14dB above nominal level | ||
| RATIO | |||
| Compressor | 1.1:1 to 3:1 program dependent | ||
| Leveler | 20:1 | ||
| Limiter | >30:1 | ||
| ATTACK TIMES | |||
| Compressor | 5 to 50msec program dependent | ||
| Leveler fast | 20Hz = 1.5 Sec >1kHz Frequency Discriminate Leveler | ||
| Leveler slow | 20Hz = 5 Sec >1kHz Frequency Discriminate Leveler | ||
| Limiter | 1 uSec | ||
| RELEASE TIMES | |||
| Compressor | 200mSec to 1 Second program dependent | ||
| Leveler fast | 3 sec | ||
| Leveler slow | 10 sec | ||
| Limiter | 200 msec | ||
| DIGITAL AUDIO | |||
| Input SR | Locks to 32, 44.1,48, 88.2, 96kHz ±3% | ||
| I/O Type | AES/EBU 110 ohms XLR | ||
| Default Output SR | User definable by replacing crystal; 48kHz standard | ||
| Word Clock | Not Supported | ||
| OTHER SPECIFICATIONS | |||
| Power Requirements | 100 - 120 - 220 - 240 VAC, 50-60Hz   20 Watts | ||
| Dimensions | 1.75"H x 19"W x 10.125" D (44.5mm x 482.6mm x 257mm) (allow for wire dress) | ||
| Net Weight | 8 lbs (3.6 kg) | ||
